To use the screen and camera in the ROOM follow these steps


In the table is a flip up panel, open it and inside are 2 USB-C Cables.  Connect these to your laptop.  You need both cables!

(Note if your laptop only has 1 USB-C, you will notice that one of the cables has an adapter on the end. Remove this use the USB-A connection instead).



if the Blue light is on at the bottom of the monitor, this means the monitor is not on. (It is backwards from what one would expect) To turn the monitor on lift it from the bottom (it is mounted on a hinge mount) and push the power button on the back, lower right side.



If you are using an online meeting such as Teams, Zoom, Vonage, WebEx, etc. for your camera choose the "Jabra PanaCast" to use the camera mounted below the monitor. 



When you are done, just unplug the USB cables from your laptop and if you removed the USB A to C adapter, please replace it on the cable so it doesn't get lost.  Place the cables back in the storage area and close the lid.